| The Shop > Wood & Stuff |
| carousel |
| << < (20/22) > >> |
| AdeV:
I'm using a VPN from time to time, and, yes, Teamviewer - and they do both allow access to Youtube... trouble is, a lot of the time, the speed is so low as to render it useless, or indeed not render it at all! |
| shipto:
Still plugging away at it when I get chance in between other stuff which always seems to be a more pressing priority :doh: Anyway I have the lights, motor and music all controlled by the arduino now and all thats left is to make a skirt for the bottom of the running board so no little fingers can get under there and be skewered by the bars and sort a roof for it, oh and clean it up because its been in the shed for so long its very dusty :bugeye: |
| tom osselton:
That’s a hell of a nice job! |
| shipto:
Thank you. It has taken way too long but as I said things keep getting in the way. |
| SwarfnStuff:
Yep, Still looking good Shipto and still galloping horses but hey, you've been a busy little chap with life's important distractions. Just looked back at my posts and the 7yr old is now 9. Bummer that means we are also another 2 years older (77) in my case. My shed / playpen sits rather idle as I mess with turning my 7x12 lathe to CNC. Exercising the grey matter because although it works there is not enough torque in the Z axis and I have decided the gremlin is the cheap driver. Waiting on a hopefully better one to arrive after emailing the motor supplier for recommendation to suit the NEMA 24 3NM I have on the Z axis. Look forward to seeing your project finished and all pretty. John B |
| Navigation |
| Message Index |
| Next page |
| Previous page |