The Shop > Wood & Stuff
carousel
tom osselton:
Have you used the 3d software it looks as if it could come in handy!
awemawson:
I understand that Mecano is now made in Pas de Calais in France. Bins Road Liverpool when I was a boy.
shipto:
Well after so long with nothing at all to report on this project the progress is dizzying :lol:
Bank holiday today (sorry Scotland didnt mean to rub it in :lol:) so first off went around my mates to use his bandsaw to rip a bit of wood into 6mm strips one of which I wrapped in plastic and inserted the pipe from a wallpaper steamer in one end so I could make a circle for the decorated top bit. While at mates workshop I made use of his sander to clean up some little laminates I made as supports for the middle of the cams.
Once I got home I did the circle which took a bit of work as the wood I had was some old stuff which had nail holes and these made keeping a circle difficult I may have to redo this with some better wood but we will see. I glued the supports to the top and once dry I made the channels that the cam wire sits in.
I am still a little unsure how best to secure the gears to the wire, I am thinking of soldering them together but any ideas would be listened to.
shipto:
Have got the top looking more carousel like now :)
shipto:
Most of the work on the mechanical bits has been done this weekend and it can all be stripped off again to tidy it all up.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version