The Shop > Wood & Stuff
carousel
<< < (7/22) > >>
tom osselton:
Have you used the 3d software it looks as if it could come in handy!
awemawson:
I understand that Mecano is now made in Pas de Calais in France. Bins Road Liverpool when I was a boy.
shipto:
Well after so long with nothing at all to report on this project the progress is dizzying  :lol:
Bank holiday today (sorry Scotland didnt mean to rub it in  :lol:) so first off went around my mates to use his bandsaw to rip a bit of wood into 6mm strips one of which I wrapped in plastic and inserted the pipe from a wallpaper steamer in one end so I could make a circle for the decorated top bit. While at mates workshop I made use of his sander to clean up some little laminates I made as supports for the middle of the cams.
Once I got home I did the circle which took a bit of work as the wood I had was some old stuff which had nail holes and these made keeping a circle difficult I may have to redo this with some better wood but we will see. I glued the supports to the top and once dry I made the channels that the cam wire sits in.
I am still a little unsure how best to secure the gears to the wire, I am thinking of soldering them together but any ideas would be listened to.
shipto:
Have got the top looking more carousel like now  :)
shipto:
Most of the work on the mechanical bits has been done this weekend and it can all be stripped off again to tidy it all up.
Navigation
Message Index
Next page
Previous page

Go to full version