Author Topic: New from Texas (Read 17171 times)

puretexan · « **on:** July 29, 2013, 08:08:36 AM »

Hi all, I'm a 60ish retired guy from Texas. I have been building custom bicycle cruiser frames,for the last several years and they have taken over all my space. I decided to get into machines in hopes of a good hobby that won't take up as much room.
I bought a used 8x12 HF lathe a couple weeks ago. Always wanted one. Got it for $500 with some tooling. Then had to have a mill to complement the lathe. I bought a Grizzly g0704. As with others my stand came bent and they are sending another. Decided to whip up a simple stand. Like mine better. As soon as the feeling comes back in two of my fingers on my left hand from lifting, I will be in good shape. Have them both setup and have made a few test runs. Going to have to wait a little on money to build up , for more tooling for the mill. Stuff gets expensive. Hope to have fun with them. My set up so far.

saw · « **Reply #1 on:** July 29, 2013, 08:47:52 AM »

Hiand welcome to us

vtsteam · « **Reply #2 on:** July 29, 2013, 09:29:28 AM »

Hello puretexan and welcome aboard!

Always exciting to start out in something with new machines and a world of possibilities! Looking forward to your contributions. And thanks for the pix!

puretexan · « **Reply #3 on:** July 29, 2013, 10:10:10 AM »

Thanks guys. I'm really excited about my new hobby. Its fun to try to learn
all the things to just get going. Have read a bunch and will continue. Lots
of good information here.

unc1esteve · « **Reply #4 on:** July 29, 2013, 10:11:11 AM »

If you can post pictures you are already smarter than I am. Welcome.

NeoTech · « **Reply #5 on:** July 29, 2013, 11:29:34 AM »

Hi and welcome, any pictures of the cruiser frames? =))

Brass_Machine · « **Reply #6 on:** July 29, 2013, 11:30:36 AM »

Howdy!

Welcome to the collective

Quote from: NeoTech on July 29, 2013, 11:29:34 AM

Hi and welcome, any pictures of the cruiser frames? =))

2nd!

Eric

puretexan · « **Reply #7 on:** July 29, 2013, 01:58:43 PM »

Thanks everybody I appreciate the welcome.
Ok here is a few I built the frames on, and I hope i'm not burning up too much
real estate. Enjoy my other insanity.

NeoTech · « **Reply #8 on:** July 29, 2013, 02:05:37 PM »

ooh two last ones is awsome.. especially the yellow one have the lines of an old hardtail motorbike. =)

puretexan · « **Reply #9 on:** July 29, 2013, 02:15:04 PM »

The last one is a copy of a 1938 Colson bicycle. I built my own and stretched
it 7'' where it would be comfortable to ride. It has the pedal forward and its easy on your legs . Am I going to get it trouble posting bikes on a machine site? If so whoever is your moderator can delete all of them.

NeoTech · « **Reply #10 on:** July 29, 2013, 02:17:03 PM »

Nah you most likely will not.. there is even a section for "motorised" stuff.. human or engine.. =)

I dont even do models im here cuz people are funny as hell and know a shitton about tooling, machining and actually answers dumb ass questions. =)

puretexan · « **Reply #11 on:** July 29, 2013, 02:22:12 PM »

Perfect... I will ask you dumb questions about tooling and if you feel the need
I have 6 years worth of knowledge on bicycle stuff. Oh and also exwives...got
a couple of them.

vtsteam · « **Reply #12 on:** July 29, 2013, 02:33:00 PM »

Quote from: puretexan on July 29, 2013, 02:15:04 PM

Am I going to get it trouble posting bikes on a machine site?

Hell no!

It's called Mad Modders not Machining Only. Check out the Penny Farthing Bicycle thread, and OKTomT's motor bike for starters....

Keep em coming!

NeoTech · « **Reply #13 on:** July 29, 2013, 02:45:21 PM »

hehe collecting exwives seems like a strange hobby..

But i will get back to you regarding bikes. Especially that yellow one ;)

puretexan · « **Reply #14 on:** July 29, 2013, 02:49:12 PM »

Ok a few more till I get hollared at. I really don't want to get kicked off
on my first day.

vtsteam · « **Reply #15 on:** July 29, 2013, 02:54:29 PM »

Live dangerously, start a thread on them. The mods will probably ask you for even more pix, and you'll get a flood of questions.

NeoTech · « **Reply #16 on:** July 29, 2013, 03:04:08 PM »

Well that settles it.. Project "Tube roller" just got prioritized on my "nifty tools that need to be made".. that first one with the springer fork.. awsome. =)

Brass_Machine · « **Reply #17 on:** July 29, 2013, 03:09:26 PM »

Quote from: puretexan on July 29, 2013, 02:15:04 PM

.... Am I going to get it trouble posting bikes on a machine site? If so whoever is your moderator can delete all of them.

Hmmm. I am going to have to say nope. No trouble (I own the board). We do a little more than just machining here. We welcome everything that you make/mod etc... So machining, welding, casting, composites & electronics to name a few.

We have a spot called the Gallery. Feel free to start a post there on what you have done. Would love to see some build logs on how you build your frames. You can post those in the Project Logs or whatever sub section fits the best ie PowerSports. I for one would love to see a build log.

Eric

Brass_Machine · « **Reply #18 on:** July 29, 2013, 03:11:11 PM »

BTW... I LOVE the bikes!

I have a ton of questions about welding or brazing the frames. I want to build a small cart for my son and need to learn.

Eric

puretexan · « **Reply #19 on:** July 29, 2013, 03:21:12 PM »

Thanks I appreciate it. I joined here due to the open atmosphere. I will do one I have built. My Nephew owns
a bicycle site and I have been a member for 6 or so years. Have lots of pictures of bike building. I use two benders.
One is a HF roller bender and the other is a JD2 bender. I have kinda filled up my space with custom bikes and that
is why I'm trying to learn how to run machines. I love to build stuff, but really don't ride bikes much.I have been retired for 7 years and if nothing silly happens I will not have to work for anybody ever again....ever!
Oh yeah I weld everything with a Hobart 140 mig with gas and solid wire.

krv3000 · « **Reply #20 on:** July 29, 2013, 04:02:55 PM »

hi and welcume

MetalCaster · « **Reply #21 on:** July 29, 2013, 08:46:42 PM »

Dang those are some COOL bikes.

SwarfnStuff · « **Reply #22 on:** July 30, 2013, 02:16:43 AM »

Hi and welcome from OZ where we ride bikes upside down

I like all of your bikes. Thank you for posting. I look forward to further posts.

JB

puretexan · « **Reply #23 on:** July 30, 2013, 09:18:17 AM »

Thanks everybody. I do appreciate the warm welcome. I look forward to producing
something on a mill. Not sure what ,but something.

MetalCaster · « **Reply #24 on:** July 30, 2013, 12:49:02 PM »

Those things are just begging to have a small motor put on them.

Pat J

Anzaniste · « **Reply #25 on:** July 30, 2013, 02:29:08 PM »

DSCN0581 by Anzaniste, on Flickr

How about one of these?

puretexan · « **Reply #26 on:** July 30, 2013, 03:40:30 PM »

Metalcaster I have already done the useless stuff with motors. Everybody needs one
of these.

and one of these.

Oh and everybody needs one of these parked in their garage. Lots of unused stuff
my wife will have to get rid of when I'm gone. Should be one heck of a garage
sale. ha ha

puretexan · « **Reply #27 on:** July 30, 2013, 03:46:17 PM »

Anzaniste that seat would make me sore just looking at it. Cool design.

Brass_Machine · « **Reply #28 on:** July 30, 2013, 04:02:55 PM »

MetalCaster · « **Reply #29 on:** July 30, 2013, 04:53:37 PM »

I am drooling on the floor, wow.

Anzaniste · « **Reply #30 on:** July 30, 2013, 07:28:33 PM »

Quote from: puretexan on July 30, 2013, 03:46:17 PM

Anzaniste that seat would make me sore just looking at it. Cool design.

Amazingly it's quite comfy except when you slide forward off the seat as I did when I first rode it!

unc1esteve · « **Reply #31 on:** July 31, 2013, 04:05:56 PM »

I do not know how to post pictures.
The pictures on the two pages are all too large.
Have to reduce to 65% to view.
Thanks.

doubleboost · « **Reply #32 on:** July 31, 2013, 04:12:46 PM »

Welcome to the forum
Some very tidy work on those bikes

John

puretexan · « **Reply #33 on:** July 31, 2013, 04:21:17 PM »

Quote from: unc1esteve on July 31, 2013, 04:05:56 PM

I do not know how to post pictures.
The pictures on the two pages are all too large.
Have to reduce to 65% to view.
Thanks.
Sorry all my pictures are posted on another website. It doesn't have the wide border, like here. If I reduce my photobucket size to make them work here it
will reduce all of them there. I will downsize my pics for here from now on. Sorry.

Meldonmech · « **Reply #34 on:** August 02, 2013, 02:43:10 AM »

Hi,

Welcome to the forum, you have two good machines there, should be capable of producing practically anything you desire.

Cheers David

unc1esteve · « **Reply #35 on:** August 02, 2013, 05:19:18 AM »

Thanks.
I have tried to read the instructions on how to post pictures
but I can not understand even the instructions.

unc1esteve · « **Reply #36 on:** August 02, 2013, 10:28:55 AM »

picture test

unc1esteve · « **Reply #37 on:** August 02, 2013, 10:29:52 AM »

Success

NeoTech · « **Reply #38 on:** August 02, 2013, 11:19:22 AM »

Quorn grinder? =)

puretexan · « **Reply #39 on:** August 04, 2013, 12:26:42 AM »

Quote from: Meldonmech on August 02, 2013, 02:43:10 AM

Hi,

Welcome to the forum, you have two good machines there, should be capable of producing practically anything you desire.

Cheers David

Thanks David. Still have a bunch to learn. I was playing with some 1 1/2'' stainless on my lathe and took too big a bite and it jerked it out of the chuck and made a mess. I wish it would have just told me . ha ha I will figure it out ...I hope.
I see Sherline sells a complete cnc mill for $2500. I might have gone that route if I had been aware they sold it before I bought my Grizzly g0704. Another grand and they give you the program and the computer too.Oh well live and learn.

News:

Author Topic: New from Texas (Read 17171 times)

MetalCaster

MetalCaster

MetalCaster