| The Shop > Electronics & IC Programing |
| fuse selection |
| << < (2/2) |
| John Rudd:
I concur with Davld, 15amp rating on he primary doesn't seem right....... If the secondary is rated for 12 amps or so that equates to around 1.5 amps on the primary...... |
| Pete49:
there ya go I knew I could rely on you all. After the comments from David & John I went and had another look with a magnifier and yep its a 1.5 so now all fixed :clap: I had those available so now the project is moving forward again. Thank you all for the help :mmr: Pete |
| sparky961:
--- Quote from: tekfab on July 27, 2013, 02:45:56 AM ---I find that a 0.8mm mig tips to be excellent slow burn fuse's , never had one blow yet ! ;-) Mike --- End quote --- Probably to be taken tongue in cheek, but I'm always surprised by the number of people who ignore the importance of fuses and breakers. If it blows, there's a reason! |
| awemawson:
There is a fairly well documented report of some plonker on the web who replaced a fuse under his dash with a .22 bullet. Apparently was some time later it went through his foot :bugeye: |
| mklotz:
--- Quote from: awemawson on July 29, 2013, 01:15:53 PM ---There is a fairly well documented report of some plonker on the web who replaced a fuse under his dash with a .22 bullet. Apparently was some time later it went through his foot :bugeye: --- End quote --- BS http://www.snopes.com/autos/techno/fuse.asp |
| Navigation |
| Message Index |
| Previous page |