Home Base > Introductions

Introduction

<< < (4/5) > >>

Brass_Machine:
Andy  :doh:

I used to live down that way. I just moved! Granted I am in North Jersey now... that may become a road trip.

clevinski:

--- Quote from: andyf on July 26, 2013, 12:13:28 AM ---BTW, and  :offtopic: did I see recently that you are in New Jersey? If so, one of the 7x12ers recently posted something which might be of interest, if it's not too far south of you.  See below.

Andy

"Cook Machinery Inc. 683 Sicklerville Road Sicklerville, NJ 08081 856-692-4900

"About 20 miles east of Philadelphia. Tom and brother Jim run the place – been there 28 years."

--- End quote ---

Hi, Andy,

I *just* saw that and emailed it to a couple of buddies!  That's only about an hour or so from me, and would certainly be worth the drive.  I'm trying to get a couple of machining buddies interested for a little road trip...

clevinski:

--- Quote from: Brass_Machine on July 26, 2013, 12:40:15 AM ---Andy  :doh:

I used to live down that way. I just moved! Granted I am in North Jersey now... that may become a road trip.

--- End quote ---
Eric,

Still a great destination for a rainy day!

krv3000:
hi and welcume

clevinski:
Thanks, KRV!

Navigation

[0] Message Index

[#] Next page

[*] Previous page