The Shop > Metal Stuff

Oil fired crucible furnace

<< < (2/46) > >>

vtsteam:
First two pieces of iron....

tekfab:
I think i'm going to have a go at making a Kwikie burner, after all i've got 600 (yes 600) gallons of used oil to dispose off so expect many questions !

Mike Young

awemawson:
Steve

I used to sprinkle something on the plinth brick to stop it sticking to the crucible but for the life of me I cannot remember what. Can't have been sand as that would fuse at those temperatures   

NeoTech:
Would be awsome to see a cross cut or a surface cut out of that square block.

mattinker:
A piece of card board or thick paper will leave carbon to separate the crucible from the plinth.

regards, Matthew

Navigation

[0] Message Index

[#] Next page

[*] Previous page