| The Shop > Metal Stuff |
| Oil fired crucible furnace |
| << < (2/46) > >> |
| vtsteam:
First two pieces of iron.... |
| tekfab:
I think i'm going to have a go at making a Kwikie burner, after all i've got 600 (yes 600) gallons of used oil to dispose off so expect many questions ! Mike Young |
| awemawson:
Steve I used to sprinkle something on the plinth brick to stop it sticking to the crucible but for the life of me I cannot remember what. Can't have been sand as that would fuse at those temperatures |
| NeoTech:
Would be awsome to see a cross cut or a surface cut out of that square block. |
| mattinker:
A piece of card board or thick paper will leave carbon to separate the crucible from the plinth. regards, Matthew |
| Navigation |
| Message Index |
| Next page |
| Previous page |