The Shop > Tools
Car boot sale bargain finds
vtsteam:
Now that's a tough post to follow!
:lol: :lol: :lol: :lol: :lol:
I was going to say here's my caliper. It outlasted two digital ones. Every time they punked out I'd reach for the old mechanical and get on with measuring whatever it was I was er, uh looking at.
krv3000:
hi all its bin the weekend and i went of shopping at the booty i got a set of m6 taps a set of m4 taps a set of 2 BA taps two dies 1 m10 by 1.5 and m8 by1 and a mini tap Handel all for £2 a drill vice £2 and a pigeon clock £1.50 but all i bort it for was the fittings on the box and ges Wat was in side no not a pigeon clock have a look at the pics
micktoon:
Well done again Bob , I bet you were pleased when you opened the box and found the DTI :thumbup: , a good day in all , some nice finds :clap:
Cheers Mick.
doubleboost:
Well done Bob
You seem to have the boot sale sorted
John
micktoon:
Sundays car boot haul , the weather has started to turn so showers made the boot sales a bit on and off but still managed to find some decent stuff. Here is the days haul.
Two Scotch augers the long wood drill bits you can see at the bottom of the photo, they have short tee tubes at the top out of the camera veiw that a bar slots through and they are just wound into the wood by hand, this is a 3/4 inch and inch sizes , I have already picked up a few smaller sizes so have a set up to inch now. The box with the electric sockets coming out of it is a 110 volt splitter box so you can leave 3 items plugged in at a time, which will be handy. Three spanners 13mm, 14mm, 17mm that fit my routers for changing bits. A Clarkson 7/16 BSF tap, a long MT3 tapered reamer, a roatry wire brush, a cup wheel for a grinder, 4 Dewalt recipricating saw blades, a clamp fixture thing, that drops into a hole and will push against an object ( just looked handy for 50p ) and last but not least , the thing that looks like a punch with a knurled section on it is a 1.25 carat diamond grinding wheel dresser made by Albert Herbert so a nice bit of quality kit.
This second photo is a small fixture that a 4 inch grinder fits into and makes it into a small chop saw, they are handy when the grinder has a thin cutting blade for cutting hardened rod etc and shortening bolts and things.
Cheers Mick.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version