Home Base > Introductions
Another Aussie
Pete W.:
--- Quote from: RodW on May 15, 2013, 05:39:28 AM ---Success
SNIP
As suspected, there is no real damage, just a bit of a dint on the bottom corner of the belt guard and a gouge out of the front panel where the knobs are on the headstock. A bit of paint, and no one will notice!
SNIP
--- End quote ---
Rod,
I'm very pleased to read the above.
No damage to either man or machine is a good result! :clap: :clap: :clap: :clap:
Still, I guess you'll perform a few checks as you rebuild and before you undertake any serious work? I hope that such checks will confirm that initial assessment.
Stilldrillin:
I'm breathing again!
Well sorted/ saved Rod! :thumbup:
David D
RodW:
Thanks guys for all the support.
--- Quote from: Stilldrillin on May 15, 2013, 06:22:05 AM ---I'm breathing again!
Well sorted/ saved Rod! :thumbup:
David D
--- End quote ---
You and me both Dave! I am very relieved. I will check it out and check it is still true once the adrenalin subsides in a day or so! I've also got a bit of wiring to do for the coolant pump and a work light while I can get behind it.
Joules:
Really pleased for you Rod that the machine doesn't seem to have sustained any serious damage.... Hmmmm wonder if I can market lathe Airbags, not an uncommon occurrence this. Everyone take extra care moving machines about.
Pete49:
Now there's a learning curve you could have done without. Good catch though and all plain sailing now with luck
Pete (in Sth Oz)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version