| Gallery, Projects and General > Project Logs |
| Steam Turbine Car |
| << < (4/8) > >> |
| PekkaNF:
--- Quote from: lordedmond on May 10, 2013, 02:36:31 AM ---....I am interested in your forum name translated its baffle plate , maybe its got lost in translation from German Stuart --- End quote --- I checkked that handle as well first time I saw it here, and whereas it seems to have very many translations and google does not help much :lol: I reasoned that most likely possibility could be louvre panel, specially the one at front of the car? PekkaNF O.T enjoyed very much YT links, they show some serious multi talent straits. |
| prallplatte:
Thank you, i will change the copper if it works and use stainless steal. Forum name: in my case, it means impact plate and was developped in the end of 2006 (go to 3:05) :zap: |
| prallplatte:
The idea of uncontrolled overheating was actually not effective, unfortunately. New ball bearings are already on the way, and once I have a buyer for my gardeners kidneys, i buy also a new turbine. Since the whole desaster is still quite hot, i will only be able to report in a few hours from the full extent of the damage. After all, the house is still standing. And nobody hurt, apart from the psychological damage. Water hammer is still working excellent. Thanks to the 1-meter superheater line right now like a flash. Probably acts as a cannon: the longer the pipe, the greater the V zero. In all the ruins i also found some consolation: because of advice i now have a copper wire in the water level glas: no more bubbles, display works perfect. And now? Steam dome increase / relocate or build steam collecting drum i cant. I do not need drainage at the beginning, since then nothing is compressed. A half full boiler in the beginning stays as a little result. Or melt down. Speaking of melting: I previously preferred way less elegant methods: (here 1:45 min.) |
| prallplatte:
My anti-water hammer bypass almost naked: and attracted ...: Works fine! btw: I can now also extend waves: |
| prallplatte:
Hilde on Alu (Kiellegung): The mystery picture?? |
| Navigation |
| Message Index |
| Next page |
| Previous page |