The Breakroom > The Water Cooler
Harrogate ME exhibition 2013
Stilldrillin:
Phil.
Don't forget to bring your wheel with you. I remember that, but not your face........ :palm:
:D
David D
philf:
Hi David,
I remember meeting you, Divided he ad, Craynerd, AussieJimG, John Stevenson and the late HS93 last year.
I'll put a bit of string through the wheel and hang it round my neck!
I've still to make one in metal. I keep thinking of a CNC lathe to profile them and then cutting out the spokes on the mill. Trouble is - I don't have a CNC lathe. (It should be possible to turn them on the mill so another project on the "to-do" list is to make an ER32 to Myford nose adaptor so I can attach a 3-jaw chuck. (Reminder to self - be careful not to try to run it at 10,000 rpm!))
I'm going to pick up a new ballscrew for the Z-axis on my mill tomorrow. When I get round to fitting it I should be able to run the Z-axis 4 or 5 times faster than with the Acme screw which is where much machining time is lost.
:beer:
Phil.
Deko:
Hi David,
I did meet you at Harrogate a few years ago, I was introduced to you by Stew, who was showing you his (then) latest creations which were in the boot of his car. (now now you lot, engines I mean ) :hammer: So I will see you and Phil by the big window at 12 noon.
Cheers Dek. :med:
P.S. I may bring the fibre optic clock if there is room in the car.
NickG:
I'll be there sat, manning the club stand 10-12 are we meeting at 12 at Chester stand then?
John Rudd:
12-00 it is then...
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version