Gallery, Projects and General > Neat Stuff

For newbs with a lathe. - i found this usefull .=)

(1/1)

NeoTech:
I hade a piece of 120x120x20mm barstock left that i needed to make a 110mm belt pulley out of.. So i took the opporunity to try this technique out..
the result:

And for other lathe n00bs like me.. here is the instruction vid.. i found that PSA paper can be replaced with coarse drawing paper or similar. =)

Meldonmech:
Hi,
    An interesting post could be used to get you out of a tight spot when you have limited facilities.

                                                             Cheers David

fixit:
thanks for taking the time to post this


Stevefixit

Navigation

[0] Message Index