| Gallery, Projects and General > Neat Stuff |
| For newbs with a lathe. - i found this usefull .=) |
| (1/1) |
| NeoTech:
I hade a piece of 120x120x20mm barstock left that i needed to make a 110mm belt pulley out of.. So i took the opporunity to try this technique out.. the result: And for other lathe n00bs like me.. here is the instruction vid.. i found that PSA paper can be replaced with coarse drawing paper or similar. =) |
| Meldonmech:
Hi, An interesting post could be used to get you out of a tight spot when you have limited facilities. Cheers David |
| fixit:
thanks for taking the time to post this Stevefixit |
| Navigation |
| Message Index |