The Shop > Our Shop
A 360 view of my shop.
NeoTech:
Well this is me.. standing in the middle of a very small room, and photographing with my iphone.. that cant take wide angle photos. ;)
In the corner is my torn down BF20 CNC rebuild.. no. 3
Next to that is my Aciera F3 mill (about 20cm) ;D
And we keep turning left and find the lathe, and a small really annoyingly loud compressor.
And behind me from the lathe is my homebuilt beltsander.
A bench with a bigass toolbox to store .. well stuff in..
And finally clamping, allen wrenches and taps, drills, endmills and lathe tooling box.
The shop floor size is ~3m across and 6.5m long. ;)
Rob.Wilson:
Very nice well equipped shop :thumbup:
hows the BF20 CNC build coming along ?
Rob
NeoTech:
Well the bf20 is torn down for the third time having clearing issues in the base. Cheap ballscrews tend to bend under rapid moves. So milled it out. And well to replace two ac bearings that got chips in them. Its a learning curve still. ;)
Brass_Machine:
Nice selection of tools!
Eric
NeoTech:
So after a while, my little bench has been a problem for storage.. i got more accessories for my Aciera.. So the old wood heating furnace had to go.. And Some c-channel, square tubing and 3mm sheet metal later.. i got myself a working bench.. The old bench got reused as a shelving under the bench, and now my TIG welder got some good space to sit at and i got a big nice steel surface to weld on. =)
Navigation
[0] Message Index
[#] Next page
Go to full version