| Gallery, Projects and General > Project Logs |
| Mrs. Robinson, Revisited....... |
| << < (14/14) |
| Stilldrillin:
As an addendum to the burner development....... Gas power is usually used, to get as much heat as possible, under a boiler. The problem is. I need a gentle, controllable, flame. It finally dawned on me, what's needed, is lower gas velocity. Provided by larger holes! As an experiment, I removed the rose insert. But it then insisted on burning, down inside the body. Made a rose, with 3.5mm holes. (And 2mm central hole, which was already in the piece of bar). The old, and new roses....... No. 3 jet, giving a full flame. Which doesn't blow itself out when full on....... But will turn down, sufficient for the engine to stop, with the burner still lit....... Heading the right way, now. I think! David D |
| Ross:
Getting there David, Lovely engine! |
| Stilldrillin:
--- Quote from: Ross on September 20, 2013, 03:47:17 PM ---Getting there David, Lovely engine! --- End quote --- Hi Ross. Thanks Mate! :thumbup: David D |
| vtsteam:
That looks really good, David! :thumbup: :clap: |
| Navigation |
| Message Index |
| Previous page |