Gallery, Projects and General > How do I??
Looking for ideas to fit a quill dro on a warco vmc
paulmo101:
Hi Folks
Thanks for the replies - plenty of ideas now.
I use the fine feed most of the time.
Cheers
Paul
Arbalist:
The DRO was the first mod on my VMC, closely followed by the drilling handle.
I have'nt done any boring on my mill so never used the fine feed. For drilling I use the large handles and for milling I raise the Knee. For ridgiditys sake I'd probably use the knee for boring as well but guess it's a personal thing I need to try both ways.
Divided he ad:
Ahh, well... There's the difference.... I ain't got a knee mill! :lol:
Is your knee powered? That's where I got the idea for my mod' I watched Bogs bore an amazingly smooth shiny cylinder with stunning ease using the powered knee on his mill :borg:
Problem solved :thumbup:
Ralph.
Jonny:
The proper and accurate way is as Divided has done. All the others will have play in the depth stop and also nut theyre attached to.
Done all 3 of mine off the quill as Divided has done before going over to full on dro 6yrs ago. You can see the alum bracket screwed to casting. Although not a 626, same principle. http://pic20.picturetrail.com/VOL15/728921/1252422/392394060.jpg
paulmo101:
Hi Folks
Thanks for all the input.
Jonny I see what you mean about mounting direct to Quill I will keep any eye open for a piece of material of suitable size to make a collar - saying that I`m sure a while ago I saw a mounting where the person had used some kind of large jubille clip to mount onto the collar on the quill but I cant seem to find anything on that at the moment.
Thanks again
Paul
Navigation
[0] Message Index
[*] Previous page
Go to full version