| Gallery, Projects and General > Project Logs |
| Plasma cnc cutting table |
| (1/2) > >> |
| amron:
Hi to all This is my first post here. let me introduce the project that I do now. it's a homemade cnc plasma cutting table. please take a look at the pics and let me have your comment/suggestions. Thanx |
| DavidA:
What's the thickness of the material you are cutting ? Dave. |
| amron:
That's depends on the plasma cutter that you attach to it. in my case, I have a Hypertherm powermax 1250 which is over my max needs since I dont intend to cut more than 16mm (5/8in.). |
| Rob.Wilson:
Welcome to Madmodder amron Interesting project you have on the go :thumbup: what CNC software will you be using ? Rob |
| amron:
Thanx Rob I've orderd and received from a Chinese supplier a 3 channel control & driver board for the stepper motors. it came with Mach3 software, but of course I'm willing to hear your advise/suggestion if from your experience another software is better. Attached pics showing the gantry. |
| Navigation |
| Message Index |
| Next page |