| Gallery, Projects and General > Project Logs |
| Oh Blimey I bought a CNC Lathe !!!! |
| << < (65/134) > >> |
| philf:
--- Quote from: awemawson on July 13, 2013, 08:48:00 AM --- :bugeye: Inside The Belly of The Beast :bugeye: Been experimenting putting a 'GoPro' video Camera inside the machine enclosure - really just mucking about trying to make sure it's in a relatively safe place and still get a reasonable shot: www.youtube.com/embed/cW5xb9LVlE8 (How do I embed a Youtube link? - cutting and pasting from the youtube embed link doesn't seem to work) --- End quote --- Andrew, Simples: Press the YouTube Button and paste the video url between the inner pair of square brackets. (Right click on video and click on "Copy Video URL".) [ Invalid YouTube link ] I'm amazed that you couldn't suss that one out considering all the far more complex problems you've shown you can solve. :thumbup: :thumbup: :beer: Phil. |
| awemawson:
Well it's still not working for me :( "Press the YouTube button" - which button where ? "Inner pair of square brackets" - which square brackets where? From the source video on my youtube page I can by right clicking : 'Copy Video URL' which gives me: [ Invalid YouTube link ] or 'Copy embed code' which gives me: <iframe width="640" height="360" src="" frameborder="0" allowfullscreen></iframe> No Youtube buttons or square brackets in sight !!!! |
| dsquire:
--- Quote from: awemawson on July 13, 2013, 08:48:00 AM --- :bugeye: Inside The Belly of The Beast :bugeye: (How do I embed a Youtube link? - cutting and pasting from the youtube embed link doesn't seem to work) --- End quote --- awemawson This is how you initially had it --- Code: ---www.youtube.com/embed/cW5xb9LVlE8 --- End code --- This is what you need to make it work --- Code: ---[youtube]cW5xb9LVlE8[/youtube] --- End code --- There are other methods but this one allways seems to work for me. it is those 11 characters between the square brackets that you have to find. Hope this helps. :D Cheers :beer: Don |
| awemawson:
OK I've found the 'Youtube' button hiding amongst the test attributes - thanks Don and Philf. |
| philf:
--- Quote from: awemawson on July 13, 2013, 11:49:55 AM ---OK I've found the 'Youtube' button hiding amongst the test attributes - thanks Don and Philf. --- End quote --- Andrew, Sorry - I should have told you where the YouTube button was. I went out just after I posted so have only just seen your reply. I didn't know you could just paste the video code between the square brackets so I've learned something myself. I'm just about to venture into the world of a CNC lathe. Mine shouldn't present much of a problem as there's no auto tool change, only a 1/2hp spindle motor and a 3-jaw manually operated chuck to worry about. (And it will fit in the boot of my car!) Cheers. Phil. |
| Navigation |
| Message Index |
| Next page |
| Previous page |