Gallery, Projects and General > Project Logs
Oh Blimey I bought a CNC Lathe !!!!
Pete W.:
--- Quote from: awemawson on February 28, 2013, 05:40:33 AM ---...he...he 415V three phase at 160 amps per phase here with the 11kv to 415v transformer in my wife's vegetable plot ! AND the nearest neighbour is half a mile away.
Certainly not a business - I'm retired and don't want that sort of pressure any more- just having fun in my dotage :beer:
--- End quote ---
Yes, but does the electricity meter take shillings (aka 5p coins) or is there a slot in the controller where you just plug your debit card?!?! :doh: :doh:
awemawson:
Well I got them to install three phase in exchange for access for re-cabling their poles & transformer so that was f.o.c. and I got them to put in a heavier supply so when eventually I re-commission my 100kva induction furnace I can run off the grid rather than run my 100kva generator as I did at the last place we moved from. Obviously the running costs are significant :bugeye: if used often but in reality it's fairly infrequent. :beer:
RussellT:
I have this vision of you sat with an enormous pile of 5p pieces trying to put them in the meter fast enough.
Russell
Tony_J:
--- Quote from: RussellT on February 28, 2013, 06:50:32 AM ---I have this vision of you sat with an enormous pile of 5p pieces trying to put them in the meter fast enough.
Russell
--- End quote ---
That's what the conveyor is for...
Regards,
Tony
hermetic:
Have you tried Steve Cox on 07836 736496, he runs landylift in West Yorks, but his other job is repairing CNC machinery.
Phil
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version