Gallery, Projects and General > Project Logs
Mini Lathe Upgrades
andyf:
Eric, I'm not sure if they stock spares, but these folk:
< http://www.bigdogmetalworks.com/productcart/pc/viewPrd.asp?idproduct=779&idcategory= > import Real Bull lathes into the US, and as you will see from that link their 7x14 has a $2 spindle flange. Might be worth enquiring if they can supply a spindle, to save on shipping over from the UK.
Andy
Brass_Machine:
Got a little bit of time this afternoon to tinker.
I marked up and drilled out the new headstock mounting holes...
I ended up have to drill out the last hole a bit over sized. I mixed up my measurements a hair. Not really a big deal, it gives me a tad bit of adjustment. See? It fits!
I lined up the new rack. Transferred the mounting holes and drilled them out. Flipped the rack and used it as a tap guide.
Turned out well.
Not much, but some progress.
Eric
Brass_Machine:
I also ran over to McMaster Carr and picked up a few things. Mainly some drill bits and some extra m3 .5 bolts (the new rack requires 5 and the old rack only has 3). The main thing I picked up was the stock to start fabbing up some tapered gibs for the cross slide.
Eric
Brass_Machine:
Looking at the pictures, I am reminded I need to make a decision. What color to I paint this thing when I am done??
Ideas?
Eric
dsquire:
Eric
It looks like now that you hit that big 4"O" you have got a fire under your butt. Looks good to see you out in the shop keeping busy. I'll be keeping tabs on you.
Cheers :beer:
Don
PS: 4"O" = 4000 posts :lol: :lol: :lol:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version