Gallery, Projects and General > Project Logs |
Mini Lathe Upgrades |
<< < (3/16) > >> |
andyf:
Eric, I'm not sure if they stock spares, but these folk: < http://www.bigdogmetalworks.com/productcart/pc/viewPrd.asp?idproduct=779&idcategory= > import Real Bull lathes into the US, and as you will see from that link their 7x14 has a $2 spindle flange. Might be worth enquiring if they can supply a spindle, to save on shipping over from the UK. Andy |
Brass_Machine:
Got a little bit of time this afternoon to tinker. I marked up and drilled out the new headstock mounting holes... I ended up have to drill out the last hole a bit over sized. I mixed up my measurements a hair. Not really a big deal, it gives me a tad bit of adjustment. See? It fits! I lined up the new rack. Transferred the mounting holes and drilled them out. Flipped the rack and used it as a tap guide. Turned out well. Not much, but some progress. Eric |
Brass_Machine:
I also ran over to McMaster Carr and picked up a few things. Mainly some drill bits and some extra m3 .5 bolts (the new rack requires 5 and the old rack only has 3). The main thing I picked up was the stock to start fabbing up some tapered gibs for the cross slide. Eric |
Brass_Machine:
Looking at the pictures, I am reminded I need to make a decision. What color to I paint this thing when I am done?? Ideas? Eric |
dsquire:
Eric It looks like now that you hit that big 4"O" you have got a fire under your butt. Looks good to see you out in the shop keeping busy. I'll be keeping tabs on you. Cheers :beer: Don PS: 4"O" = 4000 posts :lol: :lol: :lol: |
Navigation |
Message Index |
Next page |
Previous page |