Gallery, Projects and General > Gallery

Gingery Lathe and Accessories

<< < (14/24) > >>

vtsteam:
Here are three pieces that will become a single pattern for the vertical way base. On the left is the original cross slide way base, to the right are a big packing piece to add thickness and width, and a smaller piece which will form a right angle leg to bolt it to the milling table.

vtsteam:
The leg is doweled as a loose piece to make molding easier, and has a fillet attached mad of Bondo. All of these add-on pieces have to have correct draft and fit in with the original pattern's draft.

vtsteam:
Here are the pieces fitted together.

vtsteam:
And painted and rammed up in the mold. Note the draft on the loose piece.

Brass_Machine:
 :jaw: :jaw:

Wow.

 :thumbup: :bow: :thumbup:

That is some serious building. Some insanely talented people on this board...

Navigation

[0] Message Index

[#] Next page

[*] Previous page