| Gallery, Projects and General > Gallery |
| Gingery Lathe and Accessories |
| << < (14/24) > >> |
| vtsteam:
Here are three pieces that will become a single pattern for the vertical way base. On the left is the original cross slide way base, to the right are a big packing piece to add thickness and width, and a smaller piece which will form a right angle leg to bolt it to the milling table. |
| vtsteam:
The leg is doweled as a loose piece to make molding easier, and has a fillet attached mad of Bondo. All of these add-on pieces have to have correct draft and fit in with the original pattern's draft. |
| vtsteam:
Here are the pieces fitted together. |
| vtsteam:
And painted and rammed up in the mold. Note the draft on the loose piece. |
| Brass_Machine:
:jaw: :jaw: Wow. :thumbup: :bow: :thumbup: That is some serious building. Some insanely talented people on this board... |
| Navigation |
| Message Index |
| Next page |
| Previous page |