The Shop > Wood & Stuff

Wood carvings

<< < (3/9) > >>

micktoon:
 Afternoon Everyone , I have got a bit more done to the skull , just really been going over and doing more detail on the teeth and  reshaping/ sanding some areas, there has been hours and hours more time spent but maybe not easy to spot on photos ?........ I sure wish I was getting what a dentist would be getting paid for the time I have spent on them teeth !



This is the stage I am at now , the lines you can see on the skull have just been draw on with pencil this is where the fusion lines are on the skull, I am not sure if I will put these in or not yet as if they go wrong they will spoil the whole job.





I have started to reshape the back of the skull as it was not right , it still needs more work yet. I had intended the skull just to sit on the bottom of the jaw and the bottom of the rear of the skull but I might try to carve in a few neck bones and make a small base in a contrasting wood so it would sit up off the base supported by its own neck. If this did not work out I could revert to plan 'A' , cut the neck off and just have the skull.



  There is still quite a bit to do yet , I wish it was a bit bigger as getting some of the detail is tricky with it being so small. Watch this space ........ and dont have nightmares !

  Cheers Mick

doubleboost:
That is starting to look a bit on the scary side now Mick
A bit too real :bugeye: :bugeye: :bugeye: :bugeye: :bugeye: :bugeye: :bugeye:
John

andyf:
Agreed, John. It's beginning to look rather realistic. Hopefully, Mick, you will use wood finish on it when it's complete. I wouldn't like meeting it in the dark if you coat it with one of Ralph
Divided he ad's glowing finishes.  :bugeye:

Andy

Fredbare:
Excellent work Mick, thanks for sharing.

John

AussieJimG:
Thanks Mick, you have a real talent there.

Jim

Navigation

[0] Message Index

[#] Next page

[*] Previous page