The Shop > Wood & Stuff |
Wood carvings |
<< < (3/9) > >> |
micktoon:
Afternoon Everyone , I have got a bit more done to the skull , just really been going over and doing more detail on the teeth and reshaping/ sanding some areas, there has been hours and hours more time spent but maybe not easy to spot on photos ?........ I sure wish I was getting what a dentist would be getting paid for the time I have spent on them teeth ! This is the stage I am at now , the lines you can see on the skull have just been draw on with pencil this is where the fusion lines are on the skull, I am not sure if I will put these in or not yet as if they go wrong they will spoil the whole job. I have started to reshape the back of the skull as it was not right , it still needs more work yet. I had intended the skull just to sit on the bottom of the jaw and the bottom of the rear of the skull but I might try to carve in a few neck bones and make a small base in a contrasting wood so it would sit up off the base supported by its own neck. If this did not work out I could revert to plan 'A' , cut the neck off and just have the skull. There is still quite a bit to do yet , I wish it was a bit bigger as getting some of the detail is tricky with it being so small. Watch this space ........ and dont have nightmares ! Cheers Mick |
doubleboost:
That is starting to look a bit on the scary side now Mick A bit too real :bugeye: :bugeye: :bugeye: :bugeye: :bugeye: :bugeye: :bugeye: John |
andyf:
Agreed, John. It's beginning to look rather realistic. Hopefully, Mick, you will use wood finish on it when it's complete. I wouldn't like meeting it in the dark if you coat it with one of Ralph Divided he ad's glowing finishes. :bugeye: Andy |
Fredbare:
Excellent work Mick, thanks for sharing. John |
AussieJimG:
Thanks Mick, you have a real talent there. Jim |
Navigation |
Message Index |
Next page |
Previous page |