Gallery, Projects and General > How do I??

Mounting Chuck

<< < (2/3) > >>

Suggy:
Cheers chap, how hard is it to get them central again?

philf:

--- Quote from: Suggy on February 10, 2013, 01:23:01 PM ---Cheers chap, how hard is it to get them central again?

--- End quote ---

The register (recess) in the back of the chuck should be a snug fit on the flange which should have a corresponding spigot ensuring concentricity.

Phil.

andyf:
Suggy, if the 3-jaw holds reasonably true, it might be an idea to mark it and the spindle flange so you can put it back again in the same position.

Andy

saw:

--- Quote ---Suggy, if the 3-jaw holds reasonably true, it might be an idea to mark it and the spindle flange so you can put it back again in the same position.

--- End quote ---
Yes that's the right things to do.  :ddb: :ddb:

Rob.Wilson:
Hi Ian

What Phil and Andy said  :thumbup:

You may want to have a look here http://madmodder.net/index.php/topic,7643.25.html (scroll down a tad ) David came up with a good idea/mod  for the nuts that hold the chuck on .you will also notice David has marked his chuck and spindle  :med:

Rob

Navigation

[0] Message Index

[#] Next page

[*] Previous page