Gallery, Projects and General > How to's

steeper motoer mounts

(1/1)

richwest97:
hi
i am looking for plans for  steeper motor  mounts for a 7x14 lathe and a mico lux mill one of my freands tell me use a nema 17 the other says use a nema 23 i know nothing a bout converting a lathe and mill to cnc. i have been studing cad and cut4d  if someone would help me i would be forever thankfull
thank you
richard westerfield

Bluechip:
Hi Richard
 
Not sure just what you want re: 'plans for mounts' ??
 
If you want the standard frame dimensions, they are here, amongst a lot of other places.
 
http://www.bing.com/images/search?q=nema+stepper+motor+sizes&qpvt=nema+stepper+motor+sizes&FORM=IGRE
 
The frame size alone does not tell you all you need to know re: the motor characteristics. You can get a lot of very different motors with the same size frame.
 
However, I suspect that is not all you want so you'll have to be a bit more specific.

 
Dave BC
 
 

Brass_Machine:
Hi Richard,

Here is a link to some free CNC plans for the lathe LINK.

THESE should work for your mill.

Eric

richard97:
 i thank you all for helping me on my way
richard westerfield

Navigation

[0] Message Index