The Shop > Our Shop
Building my new workshop
spuddevans:
--- Quote from: doubleboost on June 03, 2013, 04:12:32 PM ---Hi
Tim
That will blend in nicely
--- End quote ---
That's kinda why I did it, makes looking at it a little easier on the eyes.
--- Quote ---Is that bin in the picture the start of a furnace :drool: :drool: :drool: :drool: :drool:
John
--- End quote ---
Not yet, that is our ultra-modern confidential document destroyer machine, it took over from the shredder when it bit the dust.
Thanks for the comments guys,
Tim
DMIOM:
--- Quote from: spuddevans on June 03, 2013, 12:29:41 PM ---I forgot to mention, I also have brought power through to the shed, as you can see the white conduit in the pics. I also pulled through 2 CAT5e cables (it was as easy pulling 2 through as it was pulling 1)
Tim
--- End quote ---
hi Tim - was screened or un-screened? you may find probs with having runs in close proximity to mains....
Dave
spuddevans:
--- Quote from: DMIOM on June 04, 2013, 06:26:37 AM ---
hi Tim - was screened or un-screened? you may find probs with having runs in close proximity to mains....
Dave
--- End quote ---
:doh: :doh: :doh: :doh: :doh: :doh: :doh: :doh: :doh: :doh: :doh:
Unscreened.
:Doh: :Doh: :Doh: :Doh: :Doh: :Doh: :Doh: :Doh: :Doh: :Doh: :Doh: :Doh:
I hope it works out ok, they only run together for 9 meters ( he says hopefully )
Tim
DMIOM:
May well be OK - otherwise you can always use it as a pull-through ! :coffee:
spuddevans:
Well it's been a while since I updated this, I have been busy with life and other stuff :bang:
I have got a bit more done, and very excitingly, I have got the mill and lathe installed in their places and even switched them on :drool:
As you can see I even have got the PC going and the CNC working (sort of, still needs a few tweaks)
I hung the monitor on the wall, keeps it out of the way, and I also put up a shelf for the PC too
Just got to tidy up the cables a bit, and as you can see I've removed the doors off from the bench, this is in preparation for the flooring fitting next week. I also have to do a huge amount of tidying and clearing up as well.
Hopefully next week will see some vinyl flooring installed, that should make sweeping up a bit easier.
Tim
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version