| Home Base > Introductions |
| Hello from Spilsby, Lincolnshire |
| (1/2) > >> |
| CNC Modeller:
Hi Im Graham an Industrial Modelmaker of 25 years, my field of interest is 3D CNC machining and I use a Roland Camm3 and 'Toolchips' machining software, Toolchips is a Danish Cadcam program which originally I used in the early days of DOS and developed into Toolchips 'Quickmill' which uses STL format for machining, I must say I get truly awesome results from this and I now use it for making parts for my Model Aircraft Kits business. |
| AdeV:
Hello! :wave: I was wondering why Spilsby was making a bell go off in my brain.... spotting Louth nearby cleared it up, you're not far from Cadwell Park circuit, where I've spent many a happy (and several unhappy) hours of my life... I'm just getting into 3D CNC, would be interested to see your work & how you go about it. |
| philf:
--- Quote from: CNC Modeller on February 04, 2013, 08:32:32 AM ---Hi Im Graham an Industrial Modelmaker of 25 years, my field of interest is 3D CNC machining and I use a Roland Camm3 and 'Toolchips' machining software, Toolchips is a Danish Cadcam program which originally I used in the early days of DOS and developed into Toolchips 'Quickmill' which uses STL format for machining, I must say I get truly awesome results from this and I now use it for making parts for my Model Aircraft Kits business. --- End quote --- Hi Graham, Welcome. I have been looking for a decent 3d CAM package for some time and have trialled many cheaper packages. I just Googled Toolchips Quickmill and got nowhere. www.toolchips.com doesn't seem to be a valid site any more - maybe it's temporarily down. Are they still in existence? Cheers. Phil. |
| AussieJimG:
Hi Graham, welcome to the forum. Jim |
| saw:
Hi and welcome to us :wave: |
| Navigation |
| Message Index |
| Next page |