« previous next »
Pages: [1]   Go Down

Author Topic: lathe quandry  (Read 11141 times)

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2532
  • Country: gb
lathe quandry
« on: December 09, 2012, 10:23:42 AM »
I acquired a mini lathe of the Clarke variety recently.....paid good money for it too... :scratch:

It needed a new motor for starters...Then some parts from the gear train were missing....I dont have the the change gears for screw cutting unfortunately....

I've bought a new motor and belt ( yup the belt was missing too... :doh:) and changed out the FC250J speed controller for one of the KB series and it is now in running order....The rest of the machine is fine and has had little use...I know the previous owner was a builder not a machinist so he didnt make much on it...

So what do I do with it? :coffee:
 I already have a Chester 9*20 and a Sieg mini lathe (brushless motor variety...which is great!! :dremel: ) and dont really need another lathe...

I'm tempted to change the bearings for tapers and add a qctp.... :dremel:

Should I sell it, keep it or something else? :D
Logged
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: lathe quandry
« Reply #1 on: December 09, 2012, 12:11:30 PM »
John.

I thought you'd gone a bit quiet!  Guess you don't need these two motors, I keep tripping over?   :scratch:
Can the scrap man have 'em?

I'd change the bearings, and add a qctp.  :thumbup:

I've got a spare set of change wheels.

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline andyf

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1795
  • Country: gb
    • The Warco WM180 Lathe - Modifications
Re: lathe quandry
« Reply #2 on: December 09, 2012, 12:14:48 PM »
It does rather duplicate your brushless mini-lathe, John, and the brushless ones are a great improvement.

I believe the Clarke badge is put on machines which are Siegs under the paint, so you could always use the change gears from the brushless one.

I'd sell it and put the money towards something you haven't got. If the buyer gripes about the lack of change gears, Arc Euro sell them:
http://www.arceurotrade.co.uk/Catalogue/Machine-Spares/C3-Mini-Lathe-Spares

A full set would be £26.50. 

Andy
Logged
Sale, Cheshire
I've cut the end off it twice, but it's still too short

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2532
  • Country: gb
Re: lathe quandry
« Reply #3 on: December 09, 2012, 03:33:20 PM »
Quote from: Stilldrillin on December 09, 2012, 12:11:30 PM
John.

I thought you'd gone a bit quiet!  Guess you don't need these two motors, I keep tripping over?   :scratch:
Can the scrap man have 'em?

I'd change the bearings, and add a qctp.  :thumbup:

I've got a spare set of change wheels.

David D

David,

I did enjoy our conversation over the phone..gave me food for thought! To the point that I decided to try and salvage the machine......
Now I'm tripping over it!

PM sent re the change wheels....

Andy,
What you say makes sense re the Sieg brushless version...I could buy something else...but what? I already have three lathes including this one and four milling machines ( one of which is a horizontal miller.....) hence the quandry

Thanks for the inspiring thoughts....... :thumbup:
Logged
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline jgroom

  • Jr. Member
  • **
  • Posts: 87
  • Country: us
  • Kansas USA
Re: lathe quandry
« Reply #4 on: December 13, 2012, 12:11:32 PM »
Sounds like someone needs a shaper.   :)  Just sayin......

Cheers

Jeff
Logged

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2532
  • Country: gb
Re: lathe quandry
« Reply #5 on: December 13, 2012, 12:33:53 PM »
Quote from: jgroom on December 13, 2012, 12:11:32 PM
Sounds like someone needs a shaper.   :)  Just sayin......

Cheers

Jeff

Jeff,

I have in my machinery arsenal:
 a Chester 9*20
 two mini lathes
 an Eagle 30 milling machine
 two mini mills
 a horizontal milling machine.....

and a shaper...Yay!!!!... :D

Who needs more machines? :dremel: :)
Logged
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 9017
  • Country: gb
  • East Sussex, UK
Re: lathe quandry
« Reply #6 on: December 13, 2012, 01:29:01 PM »
You can't have too many toys !!!!You are still short of:

Band saw
CNC lathe
CNC Mill
Horizontal grinder
Cylindrical grinder
Die sinker EDM - ( useful for removing broken taps)
Wire EDM (useful for internal splines etc)
Logged
Andrew Mawson
East Sussex

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: lathe quandry
« Reply #7 on: December 13, 2012, 03:11:20 PM »
Quote from: John Rudd on December 13, 2012, 12:33:53 PM

Who needs more machines? :dremel: :)

Aaawww........ John!  :palm:

We all need more machines!   :D

Just wish I had the space.   :bang:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2532
  • Country: gb
Re: lathe quandry
« Reply #8 on: December 13, 2012, 03:41:56 PM »
Quote from: awemawson on December 13, 2012, 01:29:01 PM
You can't have too many toys !!!!You are still short of:

Band saw

Yeah.....I forgot I have a band saw...

Oh did I tell you... ?

I have an Evolution Rage 2 metal cutting chopsaw...too :D

Logged
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline Pete W.

  • Hero Member
  • *****
  • Posts: 852
  • Country: gb
Re: lathe quandry
« Reply #9 on: December 13, 2012, 04:02:00 PM »
Hi there, John,

You really, really, really ought to have a cylindrical grinder.  Then you could make us all test bars.    :clap:  :clap:  :clap:

Mine'll be MT2, please.

Best regards,

Pete W.
 
Logged
Best regards,

Pete W.

If you can keep your head when all about you are losing theirs, you haven't seen the latest design change-note!

Rob.Wilson

  • Guest
Re: lathe quandry
« Reply #10 on: December 14, 2012, 10:43:15 AM »
Hi John

What about converting the lathe too CNC  :zap:


Rob
Logged

Offline Criz

  • Jr. Member
  • **
  • Posts: 6
  • Country: gb
Re: lathe quandry
« Reply #11 on: January 02, 2013, 03:16:23 PM »
Fire! Get into casting things?
Logged

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2532
  • Country: gb
Re: lathe quandry
« Reply #12 on: January 16, 2013, 12:50:20 PM »
I ended up selling......

Turned a profit too...... :D :D

Got a bit more space in the shop now....So what do I buy to replace it and utilise the space going spare....... :coffee:
Logged
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: lathe quandry
« Reply #13 on: January 16, 2013, 05:56:04 PM »
Quote from: John Rudd on January 16, 2013, 12:50:20 PM
I ended up selling......

Turned a profit too...... :D :D

Got a bit more space in the shop now....So what do I buy to replace it and utilise the space going spare....... :coffee:

Way to go, John!

Keep 'em moving........  :thumbup:

David D

Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!
Pages: [1]   Go Up
« previous next »