| Gallery, Projects and General > Project Logs |
| Adjustable Tailstock for a 6inch Rotary Table |
| << < (3/4) > >> |
| Meldonmech:
Hi RotarySMP. Thanks for your comments |
| Meldonmech:
Machining the Adjustable Head using a flycutter Drill & tap head for sliding nut Milling flats on sliding nut Finish threading the sliding nut Fitting the nut to the head The head fitted to the column All for now David |
| Meldonmech:
Pic.1. Milling radial slot in head Pic.2. Milling spot face Pic.3. Drilling Column and Sliding Nut in line, prior to tapping nut. All for now David |
| Meldonmech:
Machining the Adjustment Handles Pic 1 > 3 Tapping the Sliding Nut Pic 4 Cotter clamped in Head for cross drilling Pic 5 & 6 Cotter after cross drilling Pic 7 Milling the D piece David |
| mattinker:
Nice work, my kind of tooling! Split cotters rock! Since I discovered them I use them as much as is possible! Regards, Matthew |
| Navigation |
| Message Index |
| Next page |
| Previous page |