Author Topic: Webster engine-a mornings work  (Read 3330 times)

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2521
  • Country: gb
Webster engine-a mornings work
« on: January 01, 2016, 07:29:04 AM »
Machine up the latest part for my Webster build.....took all morning.!! :Doh:

The design calls for a 'bought in ' part.....I decided to roll my own....

I'll get some more fotos taken and put them up in here with this thread.....
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline raynerd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2893
  • Country: gb
    • Raynerds Projects - Raynerd.co.uk
Re: Webster engine-a mornings work
« Reply #1 on: January 01, 2016, 07:47:08 AM »
John, I built a Webster a good few years back, which part is it, can't remember buying anything but can't recognise the part.

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2521
  • Country: gb
Re: Webster engine-a mornings work
« Reply #2 on: January 01, 2016, 09:12:14 AM »
Chris,
Its the shoulder bolt for the cam- exhaust valve rocker arm thingy.....the bit machine from some 1/4 sq bar that I managed to cock up...yesterday.....so tried something simpler :lol:....


Where can I get some spring steel from for the rocker? Any ideas......?
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline chipenter

  • Hero Member
  • *****
  • Posts: 909
  • Country: gb
Re: Webster engine-a mornings work
« Reply #3 on: January 01, 2016, 02:04:47 PM »
I have used bailing straps they are pritty tough and blued allready cheep to .
Jeff

Offline raynerd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2893
  • Country: gb
    • Raynerds Projects - Raynerd.co.uk
Re: Webster engine-a mornings work
« Reply #4 on: January 01, 2016, 09:16:54 PM »
John, currently in bed (can't sleep hence 2am posting!) but I'll take a look tomorrow as I'm sure I moved away from the plans a little when it came to the rocker.

Chris