Gallery, Projects and General > Project Logs
Myford VMC CNC Project
(1/2) > >>
mrckt:
Hi all,

This is my first post and also my first serious machine project. So here she is:



The plan is to:

Strip and assess.
Acquire all the bits.
Machine all the parts.
Fit and test.
Make many things with it  :thumbup:
Rob.Wilson:
Hi and Welcome to Madmodder mrckt  :wave:


Looks like you have hours of fun in the shop converting the machine  :thumbup: there are a couple of machines undergoing such changes here on MM  :proj:

Rob
saw:
Hi and welcome to us  :wave:
Good luck with you're project.  :coffee:
Brass_Machine:
Hiya mrckt!  :wave:

Welcome to the collective :borg:

Will be watching this. I have a mini mill converted that is getting ready to undergo a rebuild!

Eric
mrckt:
Thanks for the welcome. I've spent the last few days stripping and looking at ebay for bits.

I've already got 12Nm Stepper Motor and Driver but I need to get two 3.1 Nm Stepper Motors and Drivers. I also need to buy some ballscrews and nuts.

I've not decided what to do about controlling the mill; linuxcnc or Mach3 software? I like the look of the Linux but I've not dabbled with it before. I'm also slightly tempted to use my Raspberry Pi.

Many things to think about. :coffee:

Any advice welcome!
Navigation
Message Index
Next page

Go to full version