The Craftmans Shop > New from Old

Armature rewinding

(1/1)

John Rudd:
I remember some of our forum patrons have experience in armature winding... :bow:

Anyone care to enlighten me on this skill, I'd like to learn more if you care to impart some of your knowledge and experience..

ken572:
John, :thumbup:

These books are FREE LEGAL Downloads in pdf format.
They will show you anything you need to know. :clap:

http://archive.org/details/armaturewinding017151mbp

http://archive.org/details/practicaldirecti00trevrich

http://archive.org/details/armaturewinding01braygoog

http://archive.org/details/armaturewindings00arnorich

http://archive.org/details/dynamoconstructi00urqurich

http://archive.org/details/drumarmaturescom00weymrich

http://archive.org/details/carerepairofdyna00meadrich

Enjoy.

Ken. :ddb:

vtsteam:
Also, probably you're aware of this since it looks like you're air minded (hmm that doesn't sound right...) but there is a large bunch of information on rewinding in the RCGroups forum (hope that's okay to mention) in the brushless motor design section. Not sure what you're re-winding, but I've done a few brushless re-winds, and it's not as hard as I'd imagined.

John Rudd:
vtsteam,
You are correct, I have a few model aircraft in my hangar some of which are electric powered by brushless motors...

I've also 'rolled my own' electric motors from scratch..( mebbe I should showcase them ?) but rewinding a mains powered motor is a little more involved hence the reluctance ( no pun intended...) so I was looking for some experience on which I could call on...

dsquire:

--- Quote from: John Rudd on January 31, 2013, 11:11:03 AM ---vtsteam,
You are correct, I have a few model aircraft in my hangar some of which are electric powered by brushless motors...

I've also 'rolled my own' electric motors from scratch..( mebbe I should showcase them ?) but rewinding a mains powered motor is a little more involved hence the reluctance ( no pun intended...) so I was looking for some experience on which I could call on...

--- End quote ---

John

Yes, you should showcase them and give us a chance to see your handiwork. I'm looking forward to seeing it.

Cheers  :beer:

Don
 

Navigation

[0] Message Index