Hi Guys,
Some of you may remember this from early last year.

Well after a lot of prevarication and research on YouTube decided to have a go at welding cast iron. Bought some welding rods of e-bay and got to work.

Forgot to take a photo of the initial grind out of the damage but you get the idea.

This is a shot of the edge where I had to let a piece of cast iron in to fill the void.

Final filling welds before mounting on my vertical mill.

And fitted back on the pillar drill. I had to take nearly 2mm off the front to get the table at right angles to the quill!.
Overall I am very happy with the result and the table has a nice ring when struck showing that it no longer has a crack.
