| Gallery, Projects and General > Project Logs |
| Pump centre |
| (1/1) |
| Joe d:
Will be doing some turning of irregularly shaped objects in the 4 jaw soon, so decided to build a spring-loaded centre so I can use a wiggler to centre the workpieces a bit more accurately than the old Mk I eyeball... :bugeye: All straightforward turning and drilling, nothing too special here. :thumbup: The bits: Assembled: At home in the tail-stock of the Taig (Peatol) lathe Best part of this one was that all the material including the spring were onhand already! Cheers, Joe |
| Rob.Wilson:
Nicely done Joe :thumbup: Handy being able to interchange the tail stock barrel :dremel: Rob |
| John Rudd:
A pc is a very handy bit of kit to have in the shop....specially for threading... One of the most useful gadgets I've made.. :dremel: |
| Navigation |
| Message Index |