Gallery, Projects and General > How to's

ABRASIVE BELTS Joining abrasive strip to form belts

(1/2) > >>

Meldonmech:
Hi
   I need to make some belts from abrasive strip, can any one advise re. joint preparation and adhesives.

                                                    David

Rob.Wilson:
Hi David

have a look at this    :med: 


Rob

Meldonmech:
 Hi  Rob

                  Thanks for the link, have just placed an order with ebay for the reinforced tape.

                                                        David
             

Rob.Wilson:
Hi David

Lets no how you get on with the belt joining  :thumbup: ,,, mined when that tape gets old it sheds glass fibber partials when you unwind it from the roll , very itchy .


Rob
 

Meldonmech:
Hi Rob
            Finally got round to repairing an abrasive belt. This one had pulled away on the original scarf joint, so stuck it back together with clear Bostick  and re enforced the back with the tape, working well.

                                                                                 Cheers  David

Navigation

[0] Message Index

[#] Next page