Gallery, Projects and General > The Design Shop

high torque and RPM flex drive; advise needed

<< < (4/4)

RadRod67:
Uni joints run with some eccentricity so for this application i would advise against them. If you dont want to use an elastomeric your options are Gear, Grid or disc type couplings and I think the disc type might be your best option. If you were thinking elatomeric the common pin and bush (David Brown down here) would be my first choice you could also look at Centa for example for more advanced designs.

Regards,
Rod.

Navigation

[0] Message Index

[*] Previous page