| The Shop > Tools |
| Boley 4LV |
| << < (9/21) > >> |
| smiffy:
Sorry its the end cap of the collet closer that I am missing .My spindle is bored 4 MT and at the moment I use a er collet chuck in the spindle but it would be nice to get the proper collet up and running Mike |
| RotarySMP:
Hi Mike, I have not been able to disassemble the end of my collet closer. Martin Oliver has had his apart... http://www.cncecke.de/forum/showthread.php?41731-Restauration-Boley-4L-Drehbank&p=824584&viewfull=1#post824584 He is very helpful and has done a lovely Job of restoring his 4L. Interesting that the 5LZ spindle is native MT4. The 4L and 4LV are native 358E Mark |
| smiffy:
MY 5LZ was only available as 4 mt to special order according to the information in the manual . |
| RotarySMP:
How many chuck backing plates do you have? I only have one. Martin did a group order but the CNC shop he contracted to make us a batch let us down. The 5LZ native backing plates have an locking collar to clamp to the spindle to stop the chuck unscrewing don't they? Mark |
| smiffy:
My spindle is din 3 and I can buy bison back plates from rotagrip .The lathe came with 3 and 4 jaw chuck and 1 spare back plate. The 3 jaw chuck is a Forkardt F125 chuck and a fantastic piece of kit , When I have a bit of time I will photograph it .Its the only 3 jaw chuck that I have ever seen where the jaws are reversable same as a 4 jaw chuck Does anyone have the retractable tool holder for screwcutting as i would like to know how they work ? Mike |
| Navigation |
| Message Index |
| Next page |
| Previous page |