Author Topic: Construction of springer fork (Read 20624 times)

ilia-45 · « **on:** November 21, 2012, 02:05:37 PM »

Here I will share with you the process and result of construction of several forks, the forks will be aircraft-grade aluminum, machined and Exclusive

Materials, aluminum tube 32mm in diameter and 21.5mm,3mm wall thickness,flat aluminum 25mm thick for the triple trees,round aluminum of different diameters as needed,rods of 10 mm stainless steel for springs rods and a little bronze for bushings

Forks are for electric bikes

Further story would continue photos

ilia-45 · « **Reply #1 on:** November 21, 2012, 02:12:45 PM »

ilia-45 · « **Reply #2 on:** November 21, 2012, 02:15:53 PM »

ilia-45 · « **Reply #3 on:** November 21, 2012, 02:21:45 PM »

ilia-45 · « **Reply #4 on:** November 21, 2012, 02:26:39 PM »

ilia-45 · « **Reply #5 on:** November 21, 2012, 02:31:26 PM »

ilia-45 · « **Reply #6 on:** November 21, 2012, 02:35:13 PM »

ilia-45 · « **Reply #7 on:** November 21, 2012, 02:37:46 PM »

Well that's all

Stilldrillin · « **Reply #8 on:** November 21, 2012, 03:55:04 PM »

Beautiful work Ilia!

Words are not needed.......

David D

Jonny · « **Reply #9 on:** November 21, 2012, 06:30:05 PM »

Excellent Ilya.

Making that small work for a living

Any idea how long that lots taken you?

ilia-45 · « **Reply #10 on:** November 21, 2012, 07:20:23 PM »

Thank you guys.
About the time it should be about 8 days

fixerup · « **Reply #11 on:** November 21, 2012, 11:13:19 PM »

Ilia,that is amazing work

.
Thank you for posting all these picture,
I'm learning new work technics from what you have shown in your pictures.
Reading your post, I was wondering what these springer fork were for? Then you mentioned they were for an electric bike

I wanted to see more, I checked your youtube link and again, amazing work. I like your bobber style bike and I remember seing your headlight project write-up before.
I've never seen a transmission on an electric bike. I can't imagine the speed the bike will achieve.
Project like yours only inspires me.
That is exactly why I got into homeshop machining, hoping some day I will be able to built a bike like that.

Thanks for posting!
Phil

ilia-45 · « **Reply #12 on:** November 22, 2012, 12:56:00 AM »

Thanks Phil
I'm glad you like my work, by the way I was thinking to lay out here the full build of my Bobber

Stilldrillin · « **Reply #13 on:** November 22, 2012, 03:38:08 AM »

Quote from: ilia-45 on November 22, 2012, 12:56:00 AM

Thanks Phil
I'm glad you like my work, by the way I was thinking to lay out here the full build of my Bobber

YES, please!

David D

Meldonmech · « **Reply #14 on:** November 22, 2012, 08:24:49 AM »

What an achievement, BRILLIANT.

Cheers David

saw · « **Reply #15 on:** November 22, 2012, 10:41:45 AM »

Very nice jobb

DaveH · « **Reply #16 on:** November 22, 2012, 05:27:16 PM »

Beautiful ilia

DaveH

Fredbare · « **Reply #17 on:** November 22, 2012, 05:36:31 PM »

Excellent work Ilya.

John

ilia-45 · « **Reply #18 on:** November 23, 2012, 12:56:30 AM »

thanks guys

winklmj · « **Reply #19 on:** November 24, 2012, 08:52:21 PM »

Most excellent work!

ilia-45 · « **Reply #20 on:** November 25, 2012, 05:28:43 AM »

thanks

Topos · « **Reply #21 on:** November 27, 2012, 12:36:17 PM »

Brancusi could not have made such beautiful sculptures.

Any compliment I could write would be inadequate.
You have inspired me to improve my work. Thank you.

ilia-45 · « **Reply #22 on:** November 27, 2012, 07:26:02 PM »

Thank you for such a flattering opinion of my work, happy to help

News:

Author Topic: Construction of springer fork (Read 20624 times)