Gallery, Projects and General > Gallery

How to make a Diamond-pattern

(1/3) > >>

ksor:
Here is how I make the pattern:

http://kelds.weebly.com/broslashdforme.html

(Translation in the upper right corner !!!!!!!!! )

saw:
Nice done.  :thumbup: :thumbup:

andyf:
Nice work, Ksor. In the 1960's I did something similar on the aluminium instrument panel of a 1940s car, with an electric drill in a stand, a little felt polishing mop and some abrasive paste. But it was aluminium, and soon looked dull, even though I varnished it.

Andy

Jonny:
What type of brush do you use?
Never used cutting paste which is the same as grinding/lapping paste. Always did it dry.

A trick if havent a jig or means of controlling the pattern is to overlap it. If following a pattern, the one slightly out will stick out like a sore thumb.

Fergus OMore:
It's really 'engine turning' which is worth a Google- or more.

Cheers

N

Navigation

[0] Message Index

[#] Next page