| Gallery, Projects and General > Gallery |
| How to make a Diamond-pattern |
| (1/3) > >> |
| ksor:
Here is how I make the pattern: http://kelds.weebly.com/broslashdforme.html (Translation in the upper right corner !!!!!!!!! ) |
| saw:
Nice done. :thumbup: :thumbup: |
| andyf:
Nice work, Ksor. In the 1960's I did something similar on the aluminium instrument panel of a 1940s car, with an electric drill in a stand, a little felt polishing mop and some abrasive paste. But it was aluminium, and soon looked dull, even though I varnished it. Andy |
| Jonny:
What type of brush do you use? Never used cutting paste which is the same as grinding/lapping paste. Always did it dry. A trick if havent a jig or means of controlling the pattern is to overlap it. If following a pattern, the one slightly out will stick out like a sore thumb. |
| Fergus OMore:
It's really 'engine turning' which is worth a Google- or more. Cheers N |
| Navigation |
| Message Index |
| Next page |