| The Shop > Metal Stuff |
| Green sand moulds for cast iron muffler |
| (1/2) > >> |
| ironman:
I made this video for anyone that is curious about how a sand mould is made for pouring molten metal into. In the first mould I use a reinforcing rod to stop the fragile greensand core from breaking. In the second mould I forgot to drill a hole for the draw spike and show a different way to extract the pattern from the sand mould. The third mould shows the normal way to extract a pattern from a sand mould. The castings were for a muffler for a 3hp Fairbanks morse engine that belongs to a friend. |
| Fredbare:
Very interesting, looks like many years of experience there, you make it look so easy, thanks for sharing. John |
| awemawson:
Tell us a bit about your sand muller - is it a home brew? |
| ironman:
It is a rough copy of a mixer I saw in a museum in Germany a long tme ago, so simple to make and works so well. When I first ran a cupola I thought there must be a better way of mixing large amounts of sand and this mixer is exactly what I needed. |
| awemawson:
Any chance you can put some pictures up showing a few details? - I need to go down this road myself soon |
| Navigation |
| Message Index |
| Next page |