Gallery, Projects and General > Project Logs
Peck Drill
Divided he ad:
Now that's what ball turning the tool is real good at..... very pleasing curves...... in your handle Scott :thumbup:
Just from the scale of that in your hand I can see this is going to be a monster of a peck drill!!!! (either that or you have tiny hands!!?? :lol:)
Interesting place to store your chuck key too!! :bugeye: (I know, it was a handle for the job at hand :thumbup:)
So where's this chunk of brass?? :)
--- Quote ---Ok here is the idea for the re-located pivot.
Adds some work.. but allows some more strength in the assembly. And also will allow some additional stroke to make sure I utilise the entire range of the slot.. (yes I already calculated the pivot points and the stroke for the thing.. and it will go max length... Anyhow... Input always welcome.
If its overkill.. lemme know! LOL
--- End quote ---
And as John said.... :worthless: :lol:
Hey Ron!! :wave:
--- Quote ---Is is possible for me to get a copy of Diveded he ads plans?
Ron
--- End quote ---
Well it's a long and drawn out process Ron.... Are you sure you want to go ahead with it??
Firstly you have to ask me nicely.
Secondly you have to supply me with your e-mail address.
Thirdly you have to open your mail!! :)
The only two thigs I ever ask are :
1/ Please show me the pic's of what you make.
2/ If anyone wants the drawings from you that you ask them to ask me directly. (I don't often bite.... and rarely refuse to help :) )
Not too much to ask is it??
Ralph.
SPiN Racing:
Woo long day.
Didnt have a chance to work on things.. BUt I did go to the Holy Grail.
FIRST!!!!
A LoC :worthless:
Thats what Im thinking of.. Im actually re-doing the real auto cad to do the math on the throw.. to make sure it will go far enough etc.
Picked up the chunk of Brass for the handle. Thing is.. they didnt have 1.5" diameter. Soo I had to get brand new brass. 6.15 a pound.
I also went to the tool place.. got a 0-1/2" drill chuck for the peck drill.
AND...HSS Dovetail cutter 60 degree, 1-3/8 diameter. SO that will go with the bar of 1"x3" by 24" long steel I bought.. so I can make more tool holders for the lathe :proj:
ANNNNND
THe Unobtainium 5/8-16 Taps arrived!!!! wooohooo
SO now I THINK I have all the parts to make this thing work. Now I just need to assemble it.
Pics to follow!!!! (And yes.. will update on the whole.. concept of the mount thing.. if I think I need it. Space wise.
Scott (Tired with a ton of irons in the fire)
SPiN Racing:
OK I gae it some time in Autocad..
Looks like I dont need to make the pivot out the top of it.
Here is a drawing I made.
It shows the handle with its slot cut in it. From the centerline of the shaft, downward.
With a .25 drop from the top of the larger body, and a .25 shaft, it will rotate and give me 1.4 inches of drill travel. SInce its a pecker.. it should be more than fine.
Anyhow here is the cad clip. (the rings are the travel arcs btw.. this is a side view.)
ozzie46:
Hi Ralph, sent you a PM.
Ron
ozzie46:
Got it Ralph. :thumbup:
When I have any progress on it to report I post it with pics. :proj:
Ron
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version