Gallery, Projects and General > Gallery
Gonna Do's.........
stirling lad:
good idea David, but its not really a problem for us left handers :wave:
unless you suffer from........sausage fingers..... :thumbup:
...Mike....
Stilldrillin:
Hi Mike.
Didn't realise you were cuddy wifted! :scratch:
Guess you'll not be needing this 3off, I've made for you......
David D
stirling lad:
Cuddy wifted?? never heard that one...corry fisted yes, but cuddy wifted is a new one on me...
You guys probably already all do this anyway but i usually put a slab of scrap wood underneath to stop the chuck trying to fall back off while i fiddle with them wee nuts.. i find it a great help especially with that bigger chuck..
keep the tips coming David, i'm learning all the time. :clap:
...Mike...
Stilldrillin:
Mike.
Does cack handed make sense to you? :scratch:
I wouldn't be without me square of old floorboard. It's saved the slideways, several times....... :Doh:
David D
PeterE:
My version of bed protector
A couple of scrap pieces of 6 mm MDF wooden pegged and glued together to avoid scratchy materials.
Also noticed that you must have changed your chuck screws as yours have a non-threaded portion in the middle. Have you also Loctited them (with low strength Loctite) in place in the chuck to avoid them rotating as you fiddle with the nuts?
BR
/Peter
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version