| Gallery, Projects and General > Project Logs |
| Weston Bye's Clock by Dave |
| << < (3/3) |
| dreeves:
I want to thank George Race for cutting my Great wheel from my dxf. George sent me photos of the wheel in progress and it looks great. Thanks again George Dave |
| George_Race:
Hi Dave, happy to help. I do have a question. In your last picture above, you show a gear with 6 small tabs around the perimeter. I don't recognize that piece! Very nice looking work, by the way, George |
| dreeves:
That is the rotor that has the steel piece pressed on. I changed the design to allow it to be bolted on. Look at the second file i sent you thay are the 2 pieces. Dave |
| dreeves:
:update: :update: :update: Im all caught up with all the issues to date with the rotor being cut last night finished tonight :D. I can't wait till the next issue arrives. As you will see in the photos I used the heart shape on the aluminum part but added lugs with half cuts to match the steel rotor. The lugs add a 3/16th inch cutout between the two except at the lugs which I think adds more to look at. The last photo is of the dampner disk. I spoke with Weston as to if the dampner needed to be solid and he advised that it should work but to make sure that the area where the maginets are be solid. Here are a few photos |
| Navigation |
| Message Index |
| Previous page |