| Gallery, Projects and General > Project Logs |
| Office chair wheels |
| << < (3/6) > >> |
| AdeV:
Well, who am I to refuse..... especially since Ralph recently dropped off some nice aluminium rounds which will make excellent little wheels... besides, I've now got 2 wheels which are liable to drop off the axles; unlike the plastic units, the aluminium is sufficiently rigid that I don't lose traction (or height), but obviously the extra strain on the one remaining wheel is bound to cause a failure eventually, and I'm fed up of having to put the errant wheels back on... The machine is blocked with another project at the moment, I will work on it once that one is done :D |
| DMIOM:
--- Quote from: AdeV on September 13, 2012, 10:22:53 AM ---......The machine is blocked with another project at the moment, I will work on it once that one is done .... --- End quote --- But haven't you just increased the fleet to two CNC mills ?? Dave :coffee: |
| Brass_Machine:
How did I miss this?? Saw somewhere on the net a guy who put a Recaro racing seat on casters for his office chair.... I think you could do something like that! :proj: Eric |
| rleete:
I did that with my Miata seat. Problem was, no arms, so not very comfy. I suppose I could add arms, but that's work. |
| AdeV:
--- Quote from: DMIOM on September 13, 2012, 12:52:43 PM --- But haven't you just increased the fleet to two CNC mills ?? --- End quote --- [Racing Driver Book of Excuses, vol 17, pp4750,4769 (Reasons for not using 2nd of 2 [or more] machines, physical conditions)] Excuse #4,755,312 sub-para IXV clause 7: I can only run one of them at a time due to a lack of extension leads (and in fairness, you can't just pop down Argos and get a 4-way 32-amp 3-phase trailing extension socket...) Excuse #5,102,117 sub-para MCCX clause 18a & 34c: Also, I don't like running that machine as it's short of a cooling fan & has a faulty coolant pump. [/Racing Driver Book of Excuses] More accurately, there's only one operator, and his brain cell is already fully engaged on the jig plate... |
| Navigation |
| Message Index |
| Next page |
| Previous page |