| Gallery, Projects and General > The Design Shop |
| shaft coupling help needed |
| << < (2/2) |
| HS93:
I got some of these recently from germany they post quick and take pay pal they are only about 25/28mm long I will mesure if you are interested they come 5mm but will go out to 8mm they have a pin drive in to the rubber on bothe sides so 4 pins in all they seem very sturdy. http://www.jet-drive.de/index.php?page=shop.product_details&flypage=shop.flypage&product_id=235&category_id=83&manufacturer_id=0&option=com_virtuemart&Itemid=17 also http://www.prop-shop.co.uk/index.php?id=26§ion=store&sub_section=products&product_type=26 bit expensive but strong there are two types all s/steel I think http://www.prop-shop.co.uk/index.php?id=26§ion=services&sub_section=products&product_type=26 Peter |
| Steamer5:
Hi Picclock, Bit late but you know what they say...better that then never. I modified a 3/8 flexible coupling from a socket set as a coupling between the motor & gearbox on my electric tram. A full noise the motor does 5000 rpm. This was the MK 3 version. The first 2 had little / no flexible movement or any up / down movement. The current version has been on the go now for several year & quite a few kilometers. I have since found that you can get the flex coupling with a 3/8 drive one end & the socket of your choice at the other. never checked but you maybe able to get 1/4 drive version Cheers Kerrin |
| Navigation |
| Message Index |
| Previous page |