Author Topic: Morse taper drills  (Read 9659 times)

Offline John Stevenson

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1643
  • Nottingham, England.
Morse taper drills
« on: May 07, 2013, 06:39:59 PM »
I have about 150 kg of Morse taper drills to dispose of.
A few MT1, and the rest MT2 up to MT5 all good quality and many just been professionally resharpened.
Quite a few long series.

Looking at 2 per drill regardless of size. These will have to be collected from Notts Derby border M1 J24 / 25 area, Long Eaton post code NG10

Don't ask me to sort any out, not going to happen and no I don't have lists of sizes.
Definitely not packing and posting for two quid each unless anyone is prepared to pay 35 an hour for me to go to the post office.

I'm going to the Harrogate show on Friday, will put a load in the van and will be in the main car park opposite the main admission doors 3:00pm onwards. look for a bright blue Fiat Ducato van with Stevenson Engineers on the side.

What hasn't gone by end of the month is getting weighed in
John Stevenson